G15.261 Quartz Chronographs
WWW.CERTINA.COM
WWW.CERTINA.COM
344_EN / 09.15
344_EN / 09.15
2/3
3/3
ADD function
The ADD function enables you to measure consecutive events without having to reset in between. Each time
is added to the previous total.
1
START
2
STOP
Readout
3
RESTART
4
STOP
Readout
Note:
To measure other successive events, repeat steps 3 and 4 as many times as you wish.
X
Reset counters
INTERMEDIATE TIME function
The INTERMEDIATE TIME function enables you to stop the hands to read an intermediate time, without
interrupting timing. When you restart, the chronograph hands "catch up" to the ongoing elapsed time.
1
START
2
SPLIT 1
Time readout 1
- 5 minutes
- 4 seconds
3
RESTART (catchup)
Note:
To measure other successive events, repeat steps 2 and 3 as many times as you wish.
4
STOP
Final time readout (cumulative time, as per Fig. 2)
- 25 minutes
- 18 seconds
X
Reset counters
Care and maintenance
We would advise you to clean your chronograph regularly (except for the leather strap) using a soft cloth and lukewarm soapy water. After bathing in salt water,
rinse it in fresh water and leave it to dry completely.
Do not leave it anywhere subjected to high variations in temperature or humidity, direct sunlight or strong magnetic fields.
We would advise you to have your watch inspected every 3 to 4 years by your authorised Certina
®
dealer or agent. To enjoy meticulous standards of service and
to ensure your guarantee remains in force, please always consult an authorised Certina
®
dealer or agent.
Certina
®
quartz chronographs
benefit from the precision of quartz. Their power reserve is usually more than 2 years in continuous use. If you plan not to wear
your chronograph for several weeks or months, we would advise you to store it with the crown pulled out to position
III.
This cuts the electrical power supply to
the motor, thereby extending the battery life considerably.
Replacing the battery
Once the battery has been drained, it must be replaced without delay by an authorised Certina
®
dealer or agent.
Battery type: button-type zinc-silver oxide primary battery cell, 1.55 V Battery, No. 394, SR 936 SW.
Collection and treatment of end of life quartz watches*
This symbol indicates that this product should not be disposed with household waste. It has to be returned to a local authorized collection system.
By following this procedure you will contribute to the protection of the environment and human health. Recycling of the materials will help to conserve
natural resources.
* valid in the EU member states and in any countries with corresponding legislation.