11 |
P a g e
To start the UPS via battery power (Cold start):
1.
Check all the connections are properly connected and correct.
2.
Press the
button and the UPS will power on. The fans will start and the LCD will show the default UPS
status summary screen after finishing the initialisation self-test.
3.
After a few seconds, the UPS will transfer to battery mode. If the mains power comes back the UPS will
transfer to Line mode without output interruption of the UPS.
4.
Whilst operating in battery mode the unit beep once every 10 seconds to alert the user to a mains AC
failure.
UPS SHUTDOWN WITH MAINS POWER
To shutdown the UPS with mains power:
1.
Press the
button to shut the unit down.
1.
After that, the UPS will transfer to standby mode immediately.
2.
In order to cut off the UPS output remove the mains power supply. A few seconds later the LCD display will
shut down.
UPS SHUTDOWN WITHOUT MAINS POWER
To shutdown the UPS without mains power:
1.
Power off the UPS by pressing the button, at which point the UPS output will stop.
2.
A few seconds later the LCD display will power off.
