CertaUPS C60-1000, Руководство пользователя

Страница: 6 / 14

8 | P a g e
UPS STANDARDS
DESCRIPTION STANDARD
Conduction/Radiation
IEC/EN 62040
IEC 60950-1
Harmonic Current IEC/EN 61000-3-2
Voltage Fluctuation IEC/EN 61000-3-3
ESD IEC/EN 61000-4-2
RS IEC/EN 61000-4-3
EFT IEC/EN 61000-4-4
Surge IEC/EN 61000-4-5
CS IEC/EN 61000-4-6
MS IEC/EN 61000-4-8
Voltage Dips IEC/EN 61000-4-11
Low frequency signals IEC/EN 61000-2-2
UPS INSTALLATION
INSPECTION
Every effort is made to ensure that CertaUPS systems are packaged as safely as possible to ensure that no damage is
incurred during shipment. Please visually inspect the UPS when it is received. Please keep all packaging in a safe place
for future use.
UNPACKING
The UPS unit must be positioned in a well-ventilated area that is free from excessive dust, heat and moisture. Please
take note of the specified operating temperatures and remain within these guidelines. To achieve battery design life
it is not recommended for the ambient temperature to exceed 25 degrees Celsius.
• Unpacking the unit in a low-temperature environment may cause condensation to occur in and on the
device. DO NOT install the UPS/EBM until the inside and outside of the device are clear of condensation.
• Unpack the equipment and remove shipping carton and all the packaging materials. DO NOT lift the unit
using the front and rear panels.
PLEASE FIND UPS PRODUCT DIAGRAMS AND FULL TECHNICAL SPECIFICATIONS ON PAGE 15 OR VISIT
WWW.CERTAUPS.COM/PRODUCT/CERTAUPS-C60/
PLEASE ENSURE ALL SAFETY INSTRUCTIONS HAVE BEEN OBSERVED AND UNDERSTOOD PRIOR TO UNPACKING AND
INSTALLING THE UPS
IF THE DEVICE IS DAMAGED, PLEASE NOTIFY THE CARRIER IMMEDIATELY
PACKING MATERIALS MUST BE DISPOSED OF IN COMPLIANCE WITH ALL LOCAL WASTE MANAGEMENT REGULATIONS.
RECYCLING SYMBOLS ARE PRINTED ON THE PACKING MATERIALS TO FACILITATE SORTING.