C400R User Manual
Page 22
EVENT LOG
•
By pressing on “Event log” the display will enter the event menu.
All previous events, alarms and faults will have been recorded here. This
includes the description, event code, and the precise time when the
event occurred.
The maximum number of recorded events is 50. When the event log is
full the oldest event will be overwritten.
CONTROL MENU
•
By pressing on the menu of “Control”, the display enters the
control menu.
•
Battery test: this commands the UPS to carry out a battery self-test.
•
Reset fault status
: when a fault occurs, the UPS will stay in fault
mode and alarm until acknowledged. To clear the alarm, enter
the “Reset Fault status” menu to clear the error. The UPS will stop
alarming and return to bypass mode. The cause of the fault should
be established and cleared prior to the ups being returned to
normal operation
•
Restore factory settings: all the settings will be returned to their
factory defaults. This can only be done while in bypass mode.
IDENTIFICATION MENU
•
The identification information includes UPS serial number, firmware
version and model.
TO REGISTER A FAULT PLEASE VISIT
WWW.CERTAUPS.COM/SUPPORT/FAULT-REPORTING/
