Certa CTTJCK2000A, Руководство пользователя, Страница: 8 / 16

Raising the vehicle
1.
Turn the handle clockwise as far as it will go to close the release valve.
2.
Block the vehicle's wheels to ensure the vehicle is stable during lifting.
3.
Refer to the vehicle manufacturer’s user guide to locate the approved lifting points
and appropriately place the trolley jack under the vehicle. Position the trolley jack so
that the head cap is centred on the lifting point.
4.
Pump the trolley jack to raise the head cap until it makes contact with the vehicle.
Check that the head cap is centred and is contacted on the vehicle’s lifting point
firmly.
5.
Continue to pump the jack with the handle to lift the vehicle to the desired height.
6.
After pumping, support the vehicle with appropriately rated vehicle support stands
(not supplied) before commencing work on the vehicle.
Lowering the vehicle
1.
Pump the trolley jack high enough to allow room to remove the support stands.
Remove the support stands.
2.
Ensure there is nothing below the vehicle before and while the trolley jack will be
lowered. Slowly turn the handle anti-clockwise to carefully open the release valve.
The hydraulic cylinder will then begin to fall.
OPERATION
WARNING:
Ensure the safety warnings are read and understood
before using this trolley jack.