Certa CTTJCK2000A Скачать руководство пользователя страница 3

 
 
 
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this 
user guide for future reference.  
Failure to follow the guidelines set out in this user guide may lead to incorrect use, causing 

serious injury or death.  

 

Ensure no one is inside the vehicle when the vehicle is lifted by 

the trolley jack.  

 

The trolley jack is intended for raising and lowering vehicles 
only. Do not use the trolley jack for any other purpose.  

 

Ensure to read the vehicle’s manufacturer user guide prior to 

lifting the vehicle with the trolley jack.  

 

This trolley jack has a weight capacity of 2000kg. Do not 

overload the trolley jack beyond capacity.  

 

Ensure the load is centrally located on the head cap of the 
trolley jack before raising. 

 

Do not bodily go under the vehicle if it is only supported with the trolley jack.  

 

Ensure the raised vehicle is supported with two appropriately rated support stands 
(not supplied).   

 

Ensure the trolley jack is used on flat hard ground in an open area that will allow the 

wheels to move freely when the trolley jack is being used.  

 

This trolley jack may roll during lifting and lowering.  

 

Conduct pre-operational checks on the trolley jack before every use.  

 

Ensure to chock the vehicle’s wheels that will not be lifted.  

 

Do not get dirt or any other substance inside the hydraulic system. 

 

Ensure the vehicle is supported by suitably rated vehicle support stands, and that 

hydraulic trolleys jacks are removed prior to commencing work on the vehicle.  

 

Do not move the vehicle while it is on the trolley jack.  

 

Perform regular checks on the trolley jack for damage or wear and tear. If the trolley 

jack is damaged, stop use immediately and contact 

help.Kogan.com

 for assistance.   

 

Do not attempt to disassemble or repair the trolley jack yourself.  

 

Do not make modifications or add accessories to this trolley jack.  

 

This trolley jack uses ISO VG 32/SAE 10 jack oil. Do not use any other types of oils 
inside this trolley jack.  
 

Kogan Australia Pty Ltd  
139 Gladstone Street, South Melbourne, VIC, 3205 
Australia 

 

 

         SAFETY & WARNINGS 

Содержание CTTJCK2000A

















Отзывы: