Certa CT3TRTKEJWA, Руководство пользователя

Страница: 12 / 16

The jack motor is
running but does not
operate.
Load is too heavy.
Reduce the load by relocating
the jack to other lifting points of
the vehicle.
The jack is leaking hydraulic
fluid internally.
Unit is defective. Contact
Kogan.com
The jack has not been used
for a long time and needs to
be cycled.
Set the jack Up/Down switch to
Up and then Down a few times.
The safety valve screw is
loose.
Tighten the release valve screw.
The jack Up/Down switch is
set to the incorrect position.
Set the switch to the correct
position.
The jack takes too
long to lift the load.
The vehicle’s battery voltage
is too low.
Recharge/replace the battery.
The jack has been running too
long.
Rest the unit for 15-20 minutes.
The jack is leaking hydraulic
fluid internally.
The unit is defective. Contact
Kogan.com
Ambient temperature is too
low causing jack’s hydraulic
fluid to thicken.
Warm up the unit for 1 hour
before use.
The Safety valve screw is
loose.
Tighten the safety valve screw.
Only the first stage of
jack’s pressure rod
rises.
The load is too heavy.
Reduce the load by relocating
the jack to other lifting points of
the vehicle.
The jack has been running too
long.
Rest the unit for 15-20 minutes.
The pressure rod does
not come down when
jack switch is set to
Down position.
The Inflator/Jack switch is
either set to Off or Inflator
position.
Set the switch to Jack position.
The pressure rod is stuck.
Loosen the safety valve screw to
allow the pressure rod to come
down.