Cermetek Microelectronics, Inc Page 21 of 42
Document NO. 607-00xx Revision A (12/13)
3. ONLINE CONFIGURATION
The CH232BGN module may require configuration to establish a wireless connection. The default
wireless configuration of the CH232BGN is shown in table 5 below. This information can be modified
by entering AT+ commands to the CH232BGN through the serial port.
Table 5 CH232BGN Web Access Default Setting
Parameters
Default Setting
SSID
HF-A11_AP
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
User Name
Admin
Password
Admin
3.1
Web Management Interface
Following is the procedure to configure the CH232BGN via its web interface.
Step 1: Connect a laptop to the CH232BGN, SSID “CH232BGN_AP,” via the wireless LAN;
Step 2: After the wireless connection has been established. Open the web browser on the laptop and
access “http://10.10.100.254”;
Step 3: Input the user name and password in the web page
click “OK”.
The web configuration menu includes
five pages: “Mode Selection”,” AP Interface Setting”, ”STA
Interface Setting”, ”Application Setting”, and “Device Management”
3.2
Mode Selection Page
The mode selection page, see figure 19 below, allows the user to configure the CH232BNG to operate
as an Access Point or in Station mode.
Figure 19 Mode Selection Page
