Cermetek Microelectronics, Inc.
High Speed Internet Modem Family
2005 Cermetek Microelectronics, Inc.
Page 8
Document No. 607-0017-01 Revision A (05/05)
Table 1. Summary of Available @T
®
Commands By Category for CH2165 (continued).
Command Query
Description
Static RAM Memory Management
@T
[
W
][
=flash
]
-----
Store all files and Configuration Profile changes currently in Cache RAM to Flash
memory. Files stored in Flash memory will be retained when power is removed.
Help Topics
-----
@T
[
H
][
?=n
]
Displays details for specified command,
n
, and provides an example of command
usage. See supported commands below.
-----
@T
[
H
][
?
]
Displays all supported commands. Currently:
A
Display Addresses and Subject Line command description syntax.
C
Display PPP connectivity command syntax.
D
Display send email command syntax. This Help feature currently NOT
IMPLEMENTED.
E
Display retrieve email command syntax. This Help feature currently NOT
IMPLEMENTED.
I
Display IMAP and POP3 email command syntax.
M
Display create or view email message command syntax.
N
Display local POP access phone number command syntax.
P
Display password command syntax.
S
Display mail/SMTP server command syntax.
U
Display username command syntax. This Help feature currently NOT
IMPLEMENTED.
V
Display verbose command syntax.
Z
Display factory default parameter restore command syntax.
Server Addresses
@T
[
SS
][
=n
]
@T
[
S
][
?
]
Set SMTP server symbolic name,
n
. This symbolic name is used by the CH2165 to
determine the SMTP server address.
@T
[
SM
][
=n
]
@T
[
S
][
?
]
Set POP3 server symbolic name,
n
. This symbolic name is used by the CH2165 to
determine the POP3 server address.
Internet Connectivity Status
@T
[
CS
][
=PPP
]
-----
Displays all PPP connectivity information, including iModem’s dynamic IP address.
@T
[
CS
][
=PING
]
-----
Sends four successive ping commands to the imodem.net ISP server.
TCP Management
@T
[
CP
][]
-----
Establish TCP connection. This command causes the CH2165 to perform the
following tasks in the order listed:
1. Go Off-Hook and dial POP phone number specified
@TN=n
command.
2. Connect to internet using Login ISP Username specified by
@TUI
command and
ISP Login Password specified by
@TPI
command.
3. Obtain IP address and establish TCP socket connection.
@T
[
CT
][]
-----
Terminate TCP connection. This command causes the CH2165 to perform the
following tasks in the order listed:
1. Close TCP socket connection.
2. Disconnect from the internet.
3. Go On-Hook.
Factory Defaults
@T
[
Z
][]
@T
[
Z
][
?
]
Restores the factory default parameter values. Factory defaults are “as programmed
by the factory” parameters and are based on customer supplied information. All
parameters have factory default values EXCEPT the email message body. These
parameters are not user modifiable.