User’s Manual
Quick Installation Guide
5
1.
12V DC Injector :
Attach the power cable here.
2.
Reset Button ( Reboot ) :
Press and hold the Reset button for 2 seconds to restart
system. The LED except Power indicator
( this button only for quickly Reboot )
3.
LAN1(PoE)/ LAN2/ LAN3 :
The LAN1/LAN2 /LAN3 port are for connection to external
network or POE switch.
4.
Console :
The Serial RS-232 DB9 cable attaches here.
5.
Scan Button :
→
Press and hold the Reset button for
3
seconds and release to Scan New AP's
Channel. The
STATUS
LED will be
FLASH
→
Press and hold the Reset button for more than
10
seconds to reset the system to
default configurations. The
SYSTEM
LED will be
FLASH ( Reset factory default )
6.
Antenna :
WM-200N supports 1 RF Interface with 2 SMA connectors for Antenna
connection.
7.
STATUS:
LED ON indicates System up, OFF indicates down, FLASH indicates Scan
button activated.
8.
SYSTEM:
LED ON indicates Flash busy, OFF indicates Flash Idle
9.
WLAN :
Green LED FLASH indicates Wireless ON, and FLASH quickly indicates
Wireless Transmit quickly.
10.
LAN1/LAN2 /LAN3:
Green LED ON indicates connection, OFF indicates no connection,
and FLASH indicates The Port Transmit
11.
PWR :
Green LED ON indicates power on, and OFF indicates power off.