V1.0a
Receiver:
Configures a port as a receiver port if it is a subscriber port and should only receive
multicast data. It does not receive data unless it becomes a member of the multicast group,
either statically or by using IGMP leave and join messages. Receiver ports cannot belong to
the multicast VLAN.
Source:
Configures uplink ports that receive and send multicast data as source ports.
Subscribers cannot be directly connected to source ports. All source ports on a switch belong
to the single multicast VLAN.
Note
If administrator to set a non-MVR port with MVR characteristics is operation fails. The
default configuration is as a non-MVR port.
Immediate Leave:
This function only be enabled on receiver ports to which a single receiver
device is connected. When Enables the Immediate Leave feature of MVR on the port. The
Immediate Leave feature is disabled by default.
10.4.3
Group Address
Group Address:
Administrator can set MVR multicast group addresses on the switch.
(The address range is 224.0.0.0 to 239.255.255.255)
Member:
Select Ports in the MVR Group.
Содержание CS-2424G A2S
Страница 7: ...V1 0a...
Страница 114: ...V1 0a...