Cercon Clean 230VAC, Инструкция по эксплуатации

Страница: 6 / 15

6 / 15
Fig. 2: Section through unit, viewed from the left
10 Plastic connector for filter bag 24 Sealing surfaces, circumferential
11 Filter bag 25 Seal, circumferential
12 Basket 26 Air intake opening
15 Duct, 63 mm in diameter 27 Air intake chamber
16 Duct, 40 mm in diameter 28 M6 nuts (2 ea.)
17 Cover for filter bag 29 Ledge with longitudinal bores
20 Pre-filtration chamber 30 Electrical wiring central
21 Floor rollers 31 Ultra-fine filter
22 Screws for bottom space (9 ea.) 32 Ultra-fine filtration chamber
23 Vacuum motor
2.3 Turning on the unit
(see Figs. 1 and 2 on page 4)
1. Check the filtration module (see Section 3.1).
2. Connect the 40-mm diameter hose to the milling unit (keeping the hose as
short as possible; the maximum length is approximately 2 m).