FibeAir® RFU-C
Installation Guide
Ceragon Proprietary and Confidential
Page 30 of 93
7.4
1+1 Remote Mount Installation
List of Items
Item Description
Quantity Remarks
1
RFU-C RADIO
2
2
RFU-C POLE MOUNT KIT
1
3
RFU-C COUPLER KIT
1
4
RFU-C FLEXIBLE WG KIT
1
Required Tools
The following tools are required for the RFU-C installation:
Metric offset hexagon key wrench #6
Phillips #2 screwdriver
Metric offset hexagon key wrench #2.5 and #3
Procedure
In 1+1 remote mount installation, the RFU-C radios are attached to a coupler,
while the coupler is connected to the antenna via flexible WG. To install the
RFU-C in a remote mount 1+1 configuration:
1 Mount the RFU-C coupler to the RFU-C pole mount bracket using the four
M8 screws and washers supplied with the RFU-C Coupler kit, and tighten
the screws.
2 Mount the two O-Rings supplied with the Coupler kit, according to the
Coupler kit instructions.
