4
Pull end of
Sleeve
over rod and
release rod.
Repeat for other rod.
5
Set canopy over Playard/Crib
and insert canopy tabs into
curved slots of Playard/Crib
corners.
6
Secure canopy bottom around
Playard/Crib corners using
Attachment Strips
.
ASSEMBLY and USE continued
6
1
Lay canopy on flat surface.
2
Unfold rods and insert fiber
glass ends into aluminum ends.
NOTE:
There are three
(3) sections of each rod
that must be extended.
3
Slide rod completely into
canopy fabric.
Repeat for other rod.
Canopy
WARNING
Avoid serious injury or death:
Temperature inside Playard/Crib with canopy
can be higher than outside:
• DO NOT cover mesh. Keep well ventilated.
• Keep out of direct sun.
• Remove child from Playard/Crib before
child becomes overheated.
Attachment
Strips
Canopy can only be used with Playard/Crib.
DO NOT use canopy when using bassinet.
Sleeve
