HINT:
It may be necessary to
lift end of Playard to push center
down.
6
Place floorboard in Playard with
padded side facing up.
NOTE:
DO NOT
install floorboard if using
bassinet. Go to bassinet assembly section.
1
Lay bassinet on flat surface
and spread open.
2
Rotate and extend four (4)
Hooks
until they
“click”
in
place.
3
If
floorboard is installed in
Playard, remove floorboard.
4
Fold
Floorboard
into
“W”
shape and place in center
of bassinet.
7
Secure ends of floorboard to
Playard by passing
Attachment
Straps
through holes in
bottom of Playard floor and
securing to underside of
Playard.
Playard assembly is now complete and
ready to use.
4
ASSEMBLY and USE continued
WARNING
To prevent child from
suffocating
, attachment
straps MUST be secured
to underside of Playard.
Hook
Bassinet
Attachment
Strap
WARNING
Avoid serious injury or death:
• Use bassinet with infant who weighs less
than 8.2 kg (18 lbs.) and is less than
63.5 cm (25 inches) tall.
•
DO NOT
use without floorboard being
properly place in bassinet.
• Discontinue use of bassinet if infant can
push up on hands and knees or sit
unassisted.
•
DO NOT
carry bassinet with infant in it.
•
DO NOT
use as a car bed.
•
SUFFOCATION HAZARD:
To help prevent
suffocation from entrapment, use only
floorboard provided by Century.
NEVER
use additional mattress or padding.
Floorboard
