13 • Owner’s manual - Model. CC1212-XLi
The full / float light
won’t come on.
Fault Red LED
is Flashing
or
Full Green LED
is Flashing
- Battery Ah
capacity too large
for the battery
charger and it has
time out
- Battery is defective
- Battery is severely
sulphated
- Check the charger specifications
match the battery capacity. Eg.
make sure battery capacity is
not too big for the charger.
- Battery may need replacement.
- Charge rate selected might be
too low for the battery. Switch
charger off and on and try
again or try a higher charge
rate setting providing it doesn’t
exceed the maximum charge
limit for your battery.
Note:
If the Battery Type and Charge Rate LED’s (1A or 8A or 12A) are both flashing, this indicates no
battery is detected or is below 2V and the unit is in ECO Power Saving mode.
If your battery voltage is below 2V, try the Force Start Mode by pressing and holding the Battery Type
button for 3 seconds until the 4 battery LED’s start scrolling. This will force the charger to output for
30 seconds and begin charging.