background image

| Automate

 Programming Instructions | MTSOPLAN-B 

ROLLEASE ACMED

SAFTEY INSTRUCTIONS

WARNING: Important safety instructions to be read before installation.

Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty.

CAUTION

• 

Do not expose to moisture or extreme temperatures.

• 

Do not allow children to play with this device.

• 

Use or modification outside the scope of this instruction manual will void warranty.

• 

Installation and programming to be performed by a suitably qualified installer.

• 

For use with Li-ion motors only.

• 

Do not cut power cables.

• 

Use only Rollease Acmeda hardware.

• 

Do not expose the Solar panel to water or install in humid or damp environments.

• 

Do not drill into motor body.

• 

The routing of cable through walls shall be protected by isolating bushes or grommets.

• 

Ensure power cable and aerial is clear and protected from moving parts.

• 

If cable or power connector is damaged do not use.

Important safety instructions to be read prior to operation.

• 

It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.

• 

Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge 
should not be allowed to use this product.

• 

Keep remote controls away from children.

• 

Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.

Do not dispose of in general waste. 
Please recycle batteries and damaged electrical products appropriately.

Содержание AUTOMATE








Отзывы: