1
Set both rear brakes to prevent
stroller from moving by
pushing in on both
Brake
Levers
.
2
Position child’s tray in up position:
• Rotate child’s tray over lower
edge of seat.
• Push child’s tray into slots.
• Pull on child’s tray to be sure
it is securely
locked
.
3
Remove
Tongue
of child’s
tray pad from child’s tray
Slot:
While pulling out
Red Button
, pull
up on child’s
tray pad.
4
Position stroller seat back in
recline position. (See “General
Stroller Use”.)
5
With car seat handle in
locked
carrying position (upright),
insert car seat adapter
Tongue
into child’s tray
Slot
.
NOTE:
Car seat may be placed in child’s tray slot either
rear-facing or forward-facing.
CAR SEAT/STROLLER USE
7
WARNING
Avoid serious injury from falling or sliding
out:
• Always use car seat harness straps to
restrain child, even when sleeping.
• Always be sure car seat handle is in locked
upright carrying position when lifting or
carrying child.
• Always make sure car seat is locked into
child’s tray before each use.
• Always be sure brakes are locked when
attaching and removing car seat from
stroller frame.
• DO NOT lift car seat/stroller unit by
car seat handle or car seat shell. Handle
may break.
Rear-facing
Forward-facing
Tongue
Slot
Tongue
Slot
Red Button
Tongue
Attaching Car Seat
6
Attach straps to secure car seat
to stroller:
Use of proper
Snaps
provide the
snuggest attachment to stroller
frame.
Forward-facing
Snap
Rear-facing
Snap
Slot
