manualshive.com logo in svg

Century UK MAX-THRUST RUCKUS, Сборка и инструкция по эксплуатации, Страница: 7 / 10

Поделиться
Скачать
Century UK MAX-THRUST RUCKUS Скачать руководство пользователя страница 7

Copyright Century UK Limited 2018     www.centuryuk.com

Revision V1.0

The moulded wing cowling 

should be installed once the 

wing is in place and the cables 

are threaded though to the 

cockpit area. The wing and 

cowling can now be secured 

to the fuselage using the 3 

M4 screws. 

7. Wing Fixing

The moulded wing cowling 

is used to secure the wing 

to the fuselage and can only 

be fitted one way round. The 

cutout is towards the front on 

the aircraft. 

The longer screws are used at 

the front. 

2 x M4 x 55mm Screw

1 x M4 x 38mm Screw

8. Receiver Installation

Connect the speed controller to the throttle channel of your receiver (receiver not included in 

PNP versions). This wire is easily identified, it is the only one that is routed from the front of the 

model. 

Connect the rudder and elevator servos to the corresponding channel outputs of the receiver 

and then connect the Y-lead from the ailerons to the aileron channel output and the lights to any 

spare receiver channel. There is a moulded recess in this compartment which is sufficient to 

accommodate most popular 2.4GHz receivers; however there is ample room elsewhere to locate 

yours if it does not.

We recommend that it should be securely positioned with self-adhesive “Velcro”.  

You must adhere to the receiver manufacturer recommendations regarding positioning and 

aerial routing.

Содержание MAX-THRUST RUCKUS











Отзывы:

Нет отзывов