Century UK MAX-THRUST RUCKUS Скачать руководство пользователя страница 3

Copyright Century UK Limited 2018     www.centuryuk.com

Revision V1.0

Overview

Thank you for purchasing this MAX-THRUST Ruckus radio controlled model aircraft. 

The Ruckus offers a stunning combination of terrific looks and sensational flight 

performance. Manufactured from “EPOFLEXY” it is extremely robust, however, in 

the event of a “less than perfect” arrival, we supply a range of spares to get you 

flying again in the shortest time. It is capable of a wide range of amazing aerobatic 

manoeuvres to thrill the experienced pilot, but with reduced control throws it 

provides a solid and predictable flight performance, perfect for the sports flyer.

We are certain you will enjoy your new model. Please take the time to read this 

manual thoroughly and understand its contents completely prior to commencing 

assembly.

Key Features

Powerful Brushless Motor

40A Brushless Electronic Speed Controller

Efficient 2 Blade Propeller

Pre-Installed servos

“Live” Control Surface Hinges

Durable “EPOFLEXY” Construction

Steerable Tail Wheel

Superb Flight Performance

High Brightness LED Lighting System

Specification

Wingspan: 

 

  1380mm

Length: 

 

  1130mm

Weight: 

 

  1480g

Motor:  

 

 

KV-850 Out-Runner Brushless

ESC: 

 

   40A 

Brushless

Servos:  

 

 

2 x 17g 2 x 9g

Battery Required:   

2200 - 2600mAh 11.1v Li-Po (Not Included)

 

 

 

 

2200 - 2600mAh 14.4v Li-Po (Not Included)

This manual has been produced by Century UK’s graphic department. Whilst every 

effort has been made to reproduce accurate information, we reserve the right to 

change the specifications, equipment, colour etc without prior notice. The

information in this manual cannot be recorded as infallible, and as such if you are 

unsure of anything please check with your local model shop or ourselves before 

proceeding further.

Содержание MAX-THRUST RUCKUS











Отзывы: