Century Heating CB00021, Инструкция по установке и эксплуатации

Страница: 30 / 56

Page 30 Installation and Operation Manual - FW2800
ENGLISH
8.1.2 With Lowered Ceiling
APPLIANCE CLEARANCES WITH SINGLE
WALL PIPE CONNECTOR
APPLIANCE CLEARANCES WITH DOUBLE
WALL PIPE CONNECTOR
Canada USA Canada USA
A
14
½
" (368 mm) 14
½
" (368 mm)
A
8" (203 mm) 8" (203 mm)
B
19" (483 mm) 19" (483 mm)
B
19" (483 mm) 19" (483 mm)
C 13" (330 mm) 13" (330 mm) C 13" (330 mm) 13" (330 mm)
L 78" (1981 mm) 78" (1981 mm) L 78" (1981 mm) 78" (1981 mm)
If the above clearances are met, then the distances measured from the flue outlet will be:
DISTANCES
15
FROM PIPE CONNECTOR
WITH SINGLE WALL PIPE CONNECTOR
DISTANCES
15
FROM PIPE CONNECTOR
WITH DOUBLE WALL PIPE CONNECTOR
Canada USA Canada USA
D 18" (457 mm) 18" (457 mm) D
11 ½" (292 mm) 11 ½" (292 mm)
E
28" (711 mm) 28" (711 mm)
E
28" (711 mm) 28" (711 mm)
F
21 ¾" (552 mm) 21 ¾" (552 mm)
F
21 ¾" (552 mm) 21 ¾" (552 mm)
8.1.3 With Heat Shield AC02710 and Lowered Ceiling
16
APPLIANCE CLEARANCES WITH DOUBLE
WALL PIPE CONNECTOR
DISTANCES FROM PIPE CONNECTOR
WITH DOUBLE WALL PIPE CONNECTOR
Canada USA Canada USA
A
2 ½" (64 mm) 2 ½" (64 mm)
D
6" (152 mm) 6" (152 mm)
B
2 ½" (64 mm) 2 ½" (64 mm)
E
11 ½" (292 mm) 11 ½" (292 mm)
C 2 ½" (64 mm) 2 ½" (64 mm) F 11 ¼" (286 mm) 11 ¼" (286 mm)
L
78" (1981 mm) 78" (1981 mm)
15
The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances
above mentioned.
16
To reduce the clearances of an appliance using a single wall pipe connector, the use of a heat shield certified with the single wall pipe connector
to be used as close as 6" (153 mm) from combustible materials must be used. Only in this case, the same clearances as a certified double wall
pipe connector can be used.