For more information or to watch our video tutorials visit cprosolutions.com
OWNERS MANUAL
BUCKER CONVEYOR
7
BUCKER CONVEYOR
Input Voltage
1.1 Amp - 120V 60 Hz, NA
0.55 Amp - 220V 50 Hz, EU/AUS
Bucker Conveyor Dimensions
(L x W x H)
60in x 7in x 20-25in
152cm x 18cm x 51-64cm
Bucker Belt Dimensions (L x W)
60in x 3.5in
152cm x 9cm
Belt Material
Polyurethane, 1.3mm, Food Grade
Motor Horsepower
1/8 HP
Speed Range
0-10 in/s
Warranty
1 year
SPECIFICATIONS
CLEANING
CONVEYOR
BUCKER CONVEYOR:
POSITION THE BUCKER OVER TOP OF THE CONVEYOR SO THAT
PRODUCT CAN DROP ONTO THE CONVEYOR. THE CONVEYORS
HEIGHT CAN BE ADJUSTED BY LOOSENING THE BOLTS ON
EACH OF THE LEGS. ONCE IN POSITION, PRESS DOWN THE
LOCKING CASTORS ON THE TRIMMER AND CONVEYOR TO
PREVENT MOVEMENT.
CONVEYOR POSITIONING
4
3
STEP 2
LOOSEN TENSIONER BOLT USING WRENCH.
ADJUST BOTH SIDES EQUALLY TO HOLD THE
CONVEYOR SQUARE.
STEP 3
THERE SHOULD NOW BE SLACK IN THE CON-
VEYOR BELT, WHICH WILL ALLOW ONE PER-
SON TO HOLD THE BELT UP, WHILE THE OTHER
CLEANS UNDERNEATH THE BELT.
STEP 1
SPRAY BELT WITH A DISH SOAP AND WATER SOLU-
TION, AND WIPE CLEAN WITH A SOFT CLOTH.
RINSE. THOROUGHLY DRY WITH SOFT CLOTH.
STEP 4
PULL BELT AWAY FROM ROLLERS. CLEAN AROUND
THE ENTIRE ROLLER ON EACH END. WIPE THE
CONVEYOR FRAME TO CLEAN OFF ANY RESIDUE.
ONLY USE ISOPROPYL ALCOHOL ON METAL COMPONENTS.
STEP 5
TIGHTEN TENSIONER BOLT USING WRENCH UN-
TIL CONVEYOR IS TIGHT, ENSURE TO DO BOTH
SIDES EVENLY TO KEEP CONVEYOR BELT SQUARE.
IF THE CONVEYOR STARTS TRACKING TO ONE SIDE, AD-
JUST THE TENSIONING BOLTS TO CORRECT. SEE BELT AD-
JUSTMENT INSTRUCTIONS.
