4
cprosolutions.com
1 855 535 0558
PRE-OPERATION CHECK
For your safety, and to maximize the service life of your equipment, it is very important to take a few moments before you operate the to check its condition before each use. If you
happen to come across any issues, be sure to take care of them before you operate the Conveyor.
Improperly maintaining this Conveyor, or failing to correct a problem before operation, could cause a malfunction which could cause you to be seriously injured. Always perform a pre-op-
eration inspection before each use, and correct any problem.
Before beginning your pre-operation checks, be sure the Conveyor is on a level surface, the MOTOR SWITCH is in the OFF position, and all power cords are unplugged.
CHECK THE GENERAL CONDITION OF THE CONVEYOR
Clean the Conveyor. Look for signs of damage.
Check each control for proper operation.
Check parts for wear. Replace if necessary.
Check that all nuts and bolts are tightened appropriately.
IMPORTANT SAFETY INFORMATION
We cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task. Always follow the proce-
dures and precautions in this owner’s manual. Other uses could result in injury to the operator or damage to the Conveyor and other property.
Safety Precautions
Make sure all motors are off and power cords are unplugged before you begin any cleaning, maintenance or repairs.
Read the instructions before you begin, and make sure you have the tools and skills required.
CLEAR OPERATION AREA
Before operating the Conveyor, carefully inspect the surrounding area and remove all hazards that could cause you to trip, slip, or fall into the Conveyor. Anything which can be grabbed by
the rotating Belt is a potential hazard to you and others. Look for hazards and remove them from the work area. Tie back loose clothing and long, loose hair. Remove any and all jewelry.
COVERS & GUARDS
Do not alter or remove Guards or Covers, they are designed to protect you from touching moving components. For your safety and the safety of others, keep all covers and guards in place
when the Conveyor is running.
TURN MOTOR OFF WHEN NOT OPERATING THE CONVEYOR
If you need to leave or step away from the Conveyor for any reason, always make sure to turn the motor off.
OPERATE ON FLAT SURFACE
Do not operate on slopes. To avoid overturning, only operate the Conveyor on flat surfaces. Control the Conveyor carefully when transporting it across uneven ground or slopes. Do not
push the Conveyor down or across steep slopes: the Conveyor could overturn, causing damage to the machine or injury to the operator and/or bystanders.
OPERATOR RESPONSIBILITY
Do not climb, sit or ride on the Conveyor. It is important to know how to stop the Conveyor quickly in case of emergency. Understand the use of all Conveyor controls. Never permit anyone
to operate the Conveyor without proper instruction. Do not let children operate the Conveyor.
Your safety is your responsibility.
SAFE OPERATING PRECAUTIONS
- Even if you have operated other Conveyors, to take time to become familiar with how the Centurion Pro works.
- Never operate Centurion Pro machines while under the influence of drugs, alcohol or prescriptions, including over-the-counter cold/flu/allergy medications.
- Protective clothing and eye and/or hearing protection should be worn during operation.
- For your safety, do not operate while wearing loose fitting clothing, jewelry, etc..
- Rotating machinery parts can entangle loose clothing, long hair or dangling jewelry resulting in serious injury or death.
- Long hair should be secured in a manner that keeps it away from mechanical parts.
SAFETY
BEFORE YOU START
