POLO
SWITCH
2
B
Trig
Ring
1
1
3C V3.0
2
NO Com
+
-
A
System components
POLOphone Intercom - Page 5
2 X Rawlplugs
2 X Mounting screws
1 X Cover retaining screw
1 X Telephone cord
2 X Cable ties
POLOswitch inside motor
POL
POL
phone
phone
A
U
X
2
B
Trig
Ring
1
1
3C V3.0
2
NO
Com
+
-
A
Component 2 -Handset consisting of:
POLOphone
Extras
Anti-knock shield
It provides greater protection for the entry panel against vandalism
and may be mounted to a gooseneck or directly to a wall or pillar. It
is fabricated from 304 grade stainless steel with a brushed finish
and enhances the look of the entry panel.
Conduit box mounting plate
Simplifies the installation where a conduit wall box has been
provided for mounting the handset.
The 4” x 2” backing box conduit box mounting plate replaces the
existing box plate and provides the necessary fixing points and cable
entry hole allowing direct mounting of the handset cradle bracket to it.
POLOswitch
This dual-function relay card connects to the POLOphone two -wire bus.
Depending on the switch setting on the relay card, the POLOswitch
functions either to make up an external ring extender for a particular
group of handsets or it acts as a secure gate trigger for a particular entry
panel.
14V DC Power Supply
Mains adapter (2 pin). Alternatively use auxiliary 12V supply from
gate motor.
Baseplate
Brushed finish
anti-knock shield
