Centurion G-SPEAK, Руководство по установке

Страница: 29 / 40

page 26
Command ‘AP’
As described in the Switch Phone Functionality Section, a Switch Phone is able to activate
any of the controller’s outputs via a Missed Call (both models) or SMS (
only).
Any of the Switch Phones, where configured, can turn on or off any of the outputs by
sending the text message ‘OUx ON’ or ‘OUx OFF’ to the
G-SPEAK (the ‘x’ in the
command string represents the output number referred to). If configured, the output
name can be used instead of OUx. Turning on a pulsed output will cause it to trigger,
while turning it off will have no effect.
Example:
Output 1 of a G-SPEAK has been assigned the name ALARM (using the
command string documented in the Configuration Settings section). The output can be
activated by sending an SMS with the text ‘ALARM ON’ (no quotation marks) to the
device from a Switch Phone configured for SMS activation. Likewise, the output can be
deactivated (the alarm disarmed) by sending an SMS with the text ‘ALARM OFF’ (no
quotation marks) to the unit.
Description Parameters
Adds a new Switch Phone to
activate the controller’s
output(s) via a Missed Call or
SMS (
only)
 Phone number(s) (up to 16
digits each)
 Output to be activated via
a Missed Call
 (OU1/OU2/OU3/OU4)

Output to be activated via
an SMS
 (OU1S/OU2S/OU3S/OU4S)
 Input event to be
monitored (IN1R/F/B, IN2
R/F/B, IN3 R/F/B, IN4
R/F/B)
 Rising or falling edge input
or both (R, F, or B)
AP
G-SPEAK only
Adding a New Switch Phone
Command ‘LB’
Description Parameters
Lists the Voice numbers assigned
to each button
None
LB
Retrieve List of Voice Phone Numbers Assigned
to a Call Button
(commands have been highlighted for clarity)
Examples
Sends an SMS to the originating number
listing the Voice Phone numbers assigned to
each button
Command Description
P.xxxx.LB