page 29
www.CentSys.com
•
If deleting all the remotes associated with a specific unit number, use the
directional arrows to select the unit number (between 0 and 9, 999) and confirm
your selection with the oblong button.
•
If deleting all remotes, it is simply necessary to confirm your selection using the
oblong button.
Menu 1.2.4. Delete All Remotes
Clears the entire memory of learned-in remotes. All remote controls will be removed from
the system. Remote controls are not required for this operation.
Menu 1.3. Edit Remote Button
Change the unit number of a remote or change the output(s) a specific button on the
remote activates. For example, Button 1 activates Output 2. To change this, use the
Edit Remote Button function, select Outputs 2 and 3, and button 1 of the same remote
will now activate both Outputs 2 and 3 upon being pressed. The remote control will be
required for this operation.
Procedure for Editing Remote Buttons
1. Press and hold the oblong button for a period of two seconds in order to enter the
menu.
2.
The very first menu item will be Remote Controls. Momentarily press the oblong
button – now acting as an enter key – to confirm your selection of this menu item.
3. Use the directional arrows to scroll to sub-menu Edit Remote Button, and enter using
the oblong button.
4. Next, press the remote control button that needs to be edited.
5. The Remote Details should be displayed, showing which output(s) the button
activates and which unit the remote control is associated with. Press the oblong
button (next).
6. If you want to change the output(s) associated with the button, use the directional
arrows to scroll to the desired output or combination of outputs. Press the oblong
button (next) to confirm your output(s) selection.
If you don’t want to change the output(s) (only the unit number) select the original
output for the button and press the oblong button (next).
7. If you want to change the unit of the remote control, use the directional arrows
to select the unit number (between 0 and 10,000) and confirm your selection by
pressing the oblong button (next).
8.
A confirmation message will be displayed. Press the circular button to exit or press
the next remote control button to be edited.
Menu 1.4. Count Remote Buttons
Displays the number of remote control buttons learned into the system
1
.
1. This is the number of individual buttons, not remote controls
ELECTRICAL
S
ETUP
S
ECTION
8
