page 23
www.CentSys.com
Date and Time
Latest system
message is
displayed here
Indicating Channel 2
set as INPUT with a
filter on Rising Edge
Indicating
Channel 1
set as INPUT
8. Electrical Setup
FIGURE 19
FIGURE 20
While setting up the SupaHelix system via the LCD display, all the steps that have to be
followed are clearly provided via the display. It is only necessary to note the following:
FIGURE 21
• To get into Setup Mode, press
the enter ( ) button for
two seconds and follow the
instructions provided from there
• The buttons on the Programming
Console for navigating the
system are not marked because
at each step during the setup,
the function of each button is
shown on the display
ELECTRICAL
S
ETUP
S
ECTION
8
