B. Query Firmware version
The following commands require an optional Memory Backup
Module (Product code PCA12201V1.0). See Section 6 of the
Pocket Installation Guide for location of Backup Module port
D. Backing up and Restoring the Memory
C. Query controller status/settings
Command
Description
p.xxxx.
CO.QS
Sends an SMS to the querying phone with the
following information:
&
Current state of the Outputs
&
Current state of the Inputs
&
Output configuration (Pulsed/Latched)
&
Output pulse times
&
Input-Output mappings
&
IP address and port of host server
E. Mapping Inputs to Outputs
F. Clearing Memory
p.xxxx.
CO.IO.
Allows activation and deactivation of Input-Output
mappings. If an Input is mapped to an Output, and that
Input is activated, the mapped Output will also activate,
responding according to its configuration settings:
IN1OU1:
Maps Input 1 to Output 1
IN1OU2:
Maps Input 1 to Output 2
IN2OU1:
Maps Input 2 to Output 1
IN2OU2:
Maps Input 2 to Output 2
DIN1OU1:
Deletes Input 1 to Output 1 mapping
DIN1OU2:
Deletes Input 1 to Output 2 mapping
DIN2OU1:
Deletes Input 2 to Output 1 mapping
DIN2OU2:
Deletes Input 2 to Output 2 mapping
Even though a preconfigured SMS text may have been assigned
to Outputs when adding a phone to the system, the Outputs on
the Module can also be explicitly activated by sending an SMS to
the Module.
For added convenience and flexibility, the system does allow
numbers that have not been learned into memory to activate
Outputs via SMS; however, this functionality is password-
protected and the owner of the originating number will have to be
in possession of the system password in order to activate Outputs
in this manner.
Outputs can be activated with one of the commands below:
&
OU.OU1on
Output command --- Output 1 on
&
OU.OU2on
Output command --- Output 2 on
&
OU.OU1off
Output command --- Output 1 off
&
OU.OU2off
Output command --- Output 2 off
&
OU.OU1on2off
Output command --- Output 1 on and 2 off
&
OU.OU2on1off
Output command --- Output 2 on and 1 off
&
OU.allon
Output command --- both Outputs on
&
OU.alloff
Output command --- both Outputs off
Example
&
p.1234.OU.OU2ON
Switches Output 2 on
G. Alternative SMS Activation of Outputs
Setting the new SIM PIN number in memory only
(Useful when a new SIM is going to be inserted in
the future. On startup, the Module will
automatically try this PIN if the old PIN does not
work). yyyy is the new PIN number. The old PIN
number does not have to be entered.
p.xxxx.
CO.SP.
yyyy
Command
Description
p.xxxx.
CO.QF
Sends an SMS to the querying phone with the
Module’s firmware version.
Command
Description
p.xxxx.
CO.BE
Back up the entire Module memory (EEPROM) onto a
Backup Memory Module.
This includes all user information and Module settings.
The Memory Backup Module must be in place before
the command is sent to the Module. After sending the
command, a confirmation SMS will be sent back
indicating whether the backup was successful or not.
p.xxxx.
CO
.
RE
Restore the entire Module memory (EEPROM) from a
Backup Memory Module.
This includes all user information and Module settings.
The Backup Memory Module must be in place before
the command is sent to the Module.
After sending the command, a confirmation SMS will
be sent back indicating whether the restore was
successful or not.
Command
Description
p.xxxx.
CO
.
reset.all
Resets the entire Module. All user information is
deleted, and all Module settings are restored to
Factory Default.
p.xxxx.
CO.reset.usr
Deletes all user information on the Module.
Module settings are not affected.
p.xxxx.
CO.reset.con
Resets all Module settings to Factory Defaults.
User information is not affected.
