TECHNICAL SPECIFICATIONS
FCC STATEMENT
Transmission Mode
:
UHF
Carrier Frequency
:
900 MHz Digital Hybrid
Operation Voltage
:
Transmitter, DC 12V 150mA
Speakers, 6 X ‘C’ size Alkaline batteries or DC
9V 1A adapter
Remote Control Unit, 2 X ‘AAA’ size batteries
Frequency Response
:
40Hz – 12KHz
Distortion
:
1%
S/N Ratio
:
65dB (typical)
Operation Distance
:
Up to 150 feet
Speakers
:
2-way
Output Power
:
2 x 5 Watts
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Contact your local electronic store for help.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning
: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
