SPEAKER RECEIVERS
1. Insert 6 ‘C’ size ALKALINE batteries into the battery compartment with
correct polarity at the bottom of each speaker (batteries not included in the
package) or connect the 9V power adapter to the DC input jack on the bottom
of each speaker, then plug into the wall AC outlet.
2. Press On/Off button and turn the speakers ON. The POWER LED will light up
in blue. Switch off the speakers by pressing the ON/OFF button on the
speakers or on the remote control unit, and the LED will turn off.
3. To suit the needs of different users, these speakers are designed for wall
mounting. There are two holes at the back of each speaker for you to hang
them on the wall. Screws and an instruction sheet
are included inside the package. There are two holes
on the instruction sheet, simply place the instruction
sheet on the wall and drill the holes accordingly.
REMOTE CONTROL UNIT
1. Remove the battery cover at the rear of the remote control unit and insert 2
“AAA” batteries (not included) into the battery compartment with the correct polarity.
2. Place back the cover and close the battery compartment.
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with and the blue signal LED on the transmitter will light up.
