MicPort Pro 2
User Manual
29
Limiter Controls
In the picture above, take a look at the back
panel. You will see a limiter ON/OFF switch
in the top right hand corner. Right next to it,
there is a white LED. In the OFF position, the
limiter is completely out of the circuit. But
move the switch to the "ON" position and you
will get the benefit of its smooth action.
The White LED next to the switch will only
light up when the limiter is working. Don’t be
surprised if you have turned the limiter ON
but the LED is not lit up. You will only see the
LED pulsing with the audio if the signal is
getting close to clipping. The limiter will
quickly and quietly turn the gain down and
the LED brightness will correspond do the
amount of momentary gain adjustment.
