MicPort Pro 2
User Manual
14
•
Slide the lever to the left to engage the
“Line”
position.
Hi-Z
input
is
disconnected and input gain is
reduced to accommodate line-level
sources on the ¼” jack
Low Cut Switch (HPF)
To simplify recording in noisy environments
and reduce wind or mic handling noise in
outdoor recordings, a low cut switch is
available as part of the input channel. By
design, the low frequency rumble is cut early
– right at the input jack, long before the mic
preamp has a chance to overload and ruin
your take. The switch is labeled HPF, short
for “High Pass Filter”, which is a more
appropriate name, if you want to get technical
about it. The 6dB/octave cut is below 130Hz.
