17
6.
The ice-making system cleaning cycle will continue for 30 minutes unless you press the
power switch (you can press the power switch to stop the cleaning cycle any time during
the 30 minutes). After cleaning, the harvest indicator and ice-making indicator LEDs will
be on. The cleaning process stops.
7.
Repeat steps 4 to 5 above three times to rinse the ice-making system thoroughly. This will
complete ice-making system cleaning.
(NOTE: Do not add Ice Maker Cleaner Solution to the water tank during the rinses.)
8.
Perform steps 3 and 4 in the
Interior Cleaning
section.
9.
If you want to make ice cubes after cleaning, turn off the power switch, then turn on the
power switch. The next ice-making cycle will begin.
10.
Discard the first batch of ice.
Condenser Cleaning
1.
See drawing below.
2.
The air cooled condenser should be vacuumed once or twice per year to remove any lint
that may have been drawn into it. Using a tool that seems like a probe to remove any lint
from the condenser fins.
NOTE: Do not touch condenser fins. They are sharp and can be damaged easily.
Condenser
