SKU 97187 For technical questions, please call 1-800-444-3353.
Page 2
SPECIFICATIONS
SAVE ThIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, operating
procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep both
this manual and your invoice in a safe, dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean
. Cluttered areas invite injuries.
2.
Observe work area conditions
. Do not use machines or power tools in damp or wet locations.
Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in
the presence of flammable gases or liquids.
3.
Keep children away
. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
4.
Store idle equipment
. When not in use, tools must be stored in a dry location to inhibit rust.
Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job.
Do not attempt to force a small tool or attachment to do the
work of a larger industrial tool. There are certain applications for which this tool was designed.
It will do the job better and more safely at the rate for which it was intended. Do not modify
this tool and do not use this tool for a purpose for which it was not intended.
6.
Dress properly
. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically non-conductive clothes and non-skid footwear are recommended when
working. Wear restrictive hair covering to contain long hair.
7.
Use eye protection
. Always wear ANSI approved impact safety goggles. Wear a full face
shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or
respirator when working around metal, wood, and chemical dusts and mists.
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over or across
running machines.
9.
Maintain tools with care
. Keep tools clean for better and safer performance. Follow instructions
for changing accessories. Inspect tool periodically and if any part appears broken or damaged,
have it repaired by an authorized technician. The handles must be kept clean, dry, and free
from oil and grease at all times.
10.
Disconnect power.
Disconnect tool from air compressor when not in use and before changing
accessories, maintaining, repairing, or cleaning.
11.
Remove adjusting keys and wrenches
. Check that adjusting wrenches are removed from
the tool or machine work surface before connecting it to its power source.
12.
Avoid unintentional starting
. Be sure the air compressor switch is in the Off position when
Free Speed
18,000 RPM
Recommended Air Pressure
90 PSI
Air Consumption
4 CFM
Weight
2 lbs.
Air Inlet Size
1
/
4
” NPT
Chuck Type
3
/
8
” Keyless Chuck
