Page 6
SKU 96573
For technical questions, please call 1-800-444-3353.
speciFications
Operating PSI
90 PSI
Air Inlet Size
1/4-18 NPT
Air Consumption
4 CFM
Speed
0 to 10,000 RPM
unpacking
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
operating instructions
read the entire iMportant saFety inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
1.
Use proper size and type air pressure line and fittings. The recommended air
line for this tool is at least 3/8” delivering no more than 90 PSI. Air inlet size is
1/4” 18 NPT.
2.
The use of quick connectors, and an in-line oiler, regulator, and filter are
recommended for use with this product. As shown below:
3.
oiler
recommended air line components
tool
air
compressor
Quick
coupler
air Hose
on reel
connector
Filter
regulator
connector
Connect a pressurized air source to the Air Valve and set the regulator to 90 PSI.
4.
Apply an adhesive-backed sanding head (not included) to the Pad. Cut the
sanding head to size if necessary.
5.
Secure all workpieces with a clamp or vise so that both of hands are free to
operate the Sander.
6.
Connect the Sander to the air compressor hose at the Regulator Assembly (30).
7.
Grip the Handle with your left hand and the Body (13) with your right (reverse if
you are left-handed). Depress the Trigger (28) with your left hand to turn the tool
on.
