background image

SKU 95314

For technical questions, please call 1-800-444-3353.

Page 3

6.

Dress properly while working.  Do not wear loose clothing or jewelry as

they can be caught in moving parts.  Protective, electrically non-conductive
clothes and non-skid footwear are recommended when working.  Wear
restrictive hair covering to contain long hair.

7.

Use eye and ear protection.  Wear ANSI-approved impact safety goggles and a

NIOSH-approved dust mask or respirator during use.

8.

Do not overreach.  Keep proper footing and balance at all times. Do not

reach over or across running machines.

9.

Maintain tools with care.  Keep tools clean and in good condition for better

and safer performance. Inspect tool fittings and hoses periodically and, if
damaged, have them repaired by an authorized technician. The handle must
be kept clean, dry, and free from oil and grease at all times.

10. Disconnect power. Disconnect from air pressure source when not in use.

11. Remove adjusting keys and wrenches.  Check that keys and adjusting

wrenches are removed from the tool or machine work surface before
connecting it.

12. Avoid unintentional starting.  Disconnect from air supply when not in use.

Be sure shut off valve is in OFF position before connecting to air supply.

13. Stay alert.  Watch what you are doing, use common sense. Do not operate

any tool when you are tired.

14. Check for damaged parts.  Before using any tool, any part that appears

damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician. Do not use the
tool if any switch does not turn On and Off properly.

15. Guard against electric shock when working on electrical equipment.

Prevent body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerator enclosures.

16. Replacement parts and accessories.  When servicing, use only identical

replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool.

17. Do not operate tool if under the influence of alcohol or drugs.  Read

warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.

Содержание 95314








Отзывы: