SKU 92310
For technical questions please call 1-800-444-3353. Page 5
4.
When the Universal Hose Adapter (25) is firmly in place, press the locking lever
down to lock onto the valve stem-see Figure 1.
5.
To inflate, plug the DC Power Cord into the cigarette lighter socket-see Figure 2. Then press
the DC Power Cord “ON”/”OFF” Switch (2) down to the “ON” position-see Figure 3. When
the Air Pressure Gauge (36) reaches the appropriate PSI, turn “OFF” the “On/Off” Switch.
“On/Off Switch (2)
Figure 2
Figure 3
6.
The Portable Air Compressor is now ready for operating.
7.
NOTE
: In the event the tire is totally deflated it may have separated from the
tire rim. In this case, you may need to jack up the vehicle prior to inflating the tire. If
this occurs, make certain to follow all safety instructions for the jack and for the
motor vehicle.
The Air Pressure Gauge
1.
The Air Pressure Gauge (36) is located on the top of the Portable Air Compressor-(see
Figure 3) and is calibrated in P.S.I. (Pounds Per Square Inch).
2.
The maximum air pressure this unit will produce is 300 P.S.I.
3.
Explosion Danger!
Do not inflate the air pressure beyond the pressure recommended by
the manufacturer of the item you are inflating. Over inflating a tire or inflatable may result in
serious personal injury and property damage.
4.
To obtain an accurate air pressure reading, turn off the Portable Air Compressor
when reading the gauge.
The Emergency Light
1.
The Emergency Light is located at the front of the Portable Air Compressor-see Figure 3.
2.
To use the Emergency Light, plug the DC Power Cord (11) into the cigarette lighter socket.
Then turn the DC Power Cord “ON”/”OFF” Switch (2) to the “ON” position.
3.
For continuous lighting, press the Light Switch (1) to the “LIGHT” position-see Figure 3.
4.
For a blinking light, press the Light Switch to the “FLASH” position-see Figure 3.
5.
Caution
: Do not operate the Emergency Light continuously for periods longer than 45
minutes. Doing so will cause the unit to overheat, and may damage the unit and/or cause
personal injury. It is recommended that the Emergency Light only be operated continuously
for up to 45 minutes. Then, turn off the Emergency Light and allow the unit to cool for a
minimum of 10 minutes before re-use.
Air Pressure
Gauge (36)
Light Switch (1)
Lens (4)/Light (7)
