![Central Pneumatic Air Compressor 92310 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/central-pneumatic-air-compressor/92310/92310_assembly-and-operation-instructions_2582457004.webp)
SKU 92310
For technical questions please call 1-800-444-3353. Page 4
7.
To avoid dangerous oncoming traffic, always use this product as far away from the
road side as
possible.
8.
Always use a tire pressure gauge to check the actual pressure in tires.
9.
When using the Blow Gun Nozzle accessory, always point the Nozzle away from
your body and away from others.
10.
Do not operate the Emergency Light continuously for periods of one hour or more.
Doing so will cause the unit to overheat, and may damage the unit and/or cause
personal injury. It is recommended that the Emergency Light only be operated
continuously for up to 45 minutes. Then, turn off the Emergency Light and allow
the unit to cool for a minimum of 10 minutes before re-use.
Warning:
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Unpacking
When unpacking your 12V Portable Air Compressor, check to make sure the following parts are
included. If any parts are missing or broken, please call
HARBOR FREIGHT TOOLS
at
1-800-444-3353.
Assembly/ Operation
Your 12V Portable Air Compressor comes completely assembled. It is important that you read
the entire manual to become familiar with the product BEFORE you assemble and use the Air
Compressor. Before assembling and operating the Air Compressor be sure that you have all parts
described in the Parts List and Assembly Diagram located on the last pages of this manual.
Inflating Tires
1.
Remove the valve cap from the valve stem of the tire.
2.
Remove the Cover (43) from the rear of the Portable Air Compressor and extend the
Universal Hose Adapter (25) and the DC Power Cord (11).
3.
Attach the Universal Hose Adapter (25) to the tire valve stem with the locking lever in
the up position. Check to make sure the Universal Hose Adapter is pressed down
completely over the threads of the valve stem-see Figure 1.
locking lever
Universal Hose
Adapter (25)
Figure 1