Central Machinery 96500 Скачать руководство пользователя страница 4

Page 4

SKU 96500

for technical questions, please call 1-800-444-3353.

Observe work area conditions.  

Do not use the Engine in damp or wet locations.  Do 

not expose to rain.  Keep work area well lit.  Do not use powered tools in the presence 
of flammable gases or liquids.

keep children away.  

Children must never be allowed in the work area.  Do not let 

them handle machines, tools, or extension cords.  Children must never be allowed to 
operate the Engine or be in the work area when the Engine is in operation.  

store idle equipment.  

When not in use, the Engine must be stored in a dry location 

to inhibit rust.  Always lock it up and keep out of reach of children.

dress properly.  

Do not wear loose clothing or jewelry as they can be caught in moving 

parts.  Wear restrictive hair covering to contain long hair.

use the right tool for the job.  

Do not attempt to force the Engine to do the work of 

a larger industrial tool.  There are certain applications for which this equipment was 
designed. It will do the job better and more safely at the rate for which it was intended.  
Do not modify the Engine or use it for a purpose for which it was not intended.

use eye and ear protection.  

Always wear ANSI approved impact safety goggles and 

ear plugs when using the Engine.  

do not overreach.  

Keep proper footing and balance at all times.  Do not reach over 

or across running machines.

Maintain the engine with care.  

Follow instructions for lubricating and changing ac-

cessories. 

remove adjusting keys and wrenches.  

Check that all keys and adjusting wrenches 

are removed from the Engine before starting.

Avoid unintentional starting.  

Be sure the power switch and Fuel Valve are in the Off 

position when not in use. 

check for damaged parts.  

Check for alignment and binding of moving parts; any broken 

parts or mounting fixtures; and any other condition that may affect proper operation.  Any 
part that is damaged should be properly repaired or replaced by a qualified technician. 
Do not use the Gas Engine if the switch does not turn On and Off properly.

do not operate the engine while tired or under the influence of drugs, alcohol, 
or medication.  

Read warning labels if taking prescription medicine to determine if 

your judgment or reflexes are impaired while taking drugs.  If there is any doubt, do 
not operate the Engine.

Maintenance.  

For your safety, service and maintenance should be performed regularly 

by a qualified technician.

people with pacemakers should consult their physician(s) before use.  

Electro-

magnetic fields in close proximity to heart pacemaker could cause pacemaker interfer-
ence or pacemaker failure.  Caution is necessary when near coil, spark plug cables, or 
distributor of running engine.  Engine should be off during distributor adjustment.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

Содержание 96500





















Отзывы: