Page 5
skU 93981
For technical questions, please call 1-800-444-3353
Maintain a safe working environment.
keep the work area well lit. Make sure there
is adequate surrounding workspace. always keep the work area free of obstructions,
grease, oil, trash, and other debris. do not use a power tool in areas near flammable
chemicals, dusts, and vapors. do not use this product in a damp or wet location.
Avoid unintentional starting.
Make sure you are prepared to begin work before turn-
ing on the Belt sander
.
Do not force the Belt Sander.
This tool will do the work better and safer at the speed
and capacity for which it was designed.
Always unplug the Belt Sander from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
Never leave the Belt Sander unattended while running.
Turn power off if you have
to leave the Belt sander
.
Before each use, check all nuts, bolts, and screws for tightness.
vibration during
mixing may cause these to loosen.
Keep extension cord off the ground and away from water.
Always connect the Line Cord to a Ground fault Circuit Interrupter (GfCI) pro-
tected electrical outlet.
Install this product on a proper surface.
locate on a flat, level, and solid surface
that is capable of supporting the weight of the Belt sander
.
Always maintain a maximum of 1/16 inch clearance between the table and the
sanding Disc.
Do not use the right side of the disc for sanding.
The material could kick back.
hold material securely while sanding to avoid kickback.
WARNING!
some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known (to the state of California)
to cause cancer, birth defects or other reproductive harm. some examples of these
chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or
other masonry products, arsenic and chromium from chemically treated lumber. Your
risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to
filter out microscopic particles. (California Health & safety Code § 25249.5,
et seq.
)
WARNING!
People with pacemakers should consult their physician(s) before us-
ing this product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
