SKU 92066
For technical questions, please call 1-800-444-3353
Page 4
Rotary Table Specific Safety Precautions
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are fac-
tors which cannot be built into this product, but must be supplied by the opera-
tor.
Warning: The brass components of this product contain lead, a chemical known
to the State of California to cause birth defects (or other reproductive harm).
(California Health & Safety Code 25249.5 et seq.)
Caution: Prior to using the Rotary Table on a milling or other machine, make
sure to read and understand all instructions and safety precautions as out-
lined in the machine’s operation manual.
Unpacking
When unpacking, check to make sure that all the parts are included. Refer to the
Parts List and Assembly Drawing at the end of this manual. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual.
Operation
1.
Secure the Rotary Table to the saddle of the milling machine using the two
vertical or horizontal mounting slots on the Rotary Table and appropriate
hardware (not supplied).
2.
Securely mount the workpiece to the Rotary Table (hardware not supplied).
3.
Loosen Brass Screw (2), then turn Hand Wheel (5) to move the table to the
desired angle. Read the angle (in degrees and seconds) on the Rotary Table
(7) and Hand Wheel (5) scales.
4.
Retighten Brass Screw (2).
5.
Begin milling operation as outlined in the operating manual of the machine
being used. Adhere to all warnings and instructions provided in the manual.
Maintenance
1.
To clean the Rotary Table, apply a mild solvent to a clean cloth and wipe
clean.
2.
To prevent oxidation, apply a thin coat of light oil to the surface and all moving
parts.
3.
Store the Rotary Table in a clean and dry location.
