SKU 92066
For technical questions, please call 1-800-444-3353
Page 2
Specifications
Item Description
Application
For use on small milling and multipurpose
machines.
Table Diameter
3 inches
Table Rotation
360 degrees in 10 degree increments (w ith
marks every 5 degrees)
Hand Wheel Scale
10
o
per revolution marked at 30 minute
increments
Machine Mounting
T-slots for vertical and horizontal mounting
Mounting Slot Dimensions
1/4 (W) x 0.47 (D) inches
Overall D im ensions
4-7/8 (L) x 5-3/8 (W) x 1-1/2 (H) inches
Table Dimensions
3 (dia.) x 1/2 (H) inches
Weight 3.2
lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in
damp or wet locations. Don’t expose to rain. Keep work area well lighted.
Do not use electrically powered tools in the presence of flammable gases or
liquids.
3.
Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this tool and
do not use this tool for a purpose for which it was not intended.
