Page 20
SKU 90589
For technical questions, please call 1-800-444-3353.
The silencer is clogged.
Solution:
Clean or replace the silencer.
Situation:
4.
Turntable does not lock the wheel rim correctly.
possible Reasons:
A. The jaws are worn.
B. Defective piston
Solutions:
A.
Replace jaws
b.
Replace plate cylinder gasket.
Situation:
5.
Tool touches the wheel rim during tire mounting/demounting process.
possible Reasons:
A. The Locking slide is incorrectly adjusted or defective.
B. The Locking slide screw is loose.
Solutions:
A.
Adjust or replace the locking slide.
b.
Tighten the screw.
Situation:
6.
Bead Breaker Pedal and Jaw clamp pedal lock out of position.
possible Reason:
Return spring of the pedal broken.
Solution:
Replace spring.
Situation:
7.
Bead breaking operation difficult
possible Reasons:
A. The silencer is clogged.
B. The Value shaft O-ring is broken.
C. The cylinder piston V-seal or O-ring are broken
Solutions:
A.
Clean or replace the silencer.
b.
Replace the O-ring.
C.
Replace the V-seal or O-ring.
