Page 5
For technical questions, please call 1-888-866-5797.
Item 61790
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
Motor (27)
Motor Base (41)
Fan Housing (17)
Base plate (40)
Bolt (16)
Figure c
6. Set the Outlet Gasket (19) on top of the rectangular
opening of the Fan Housing. Set the Outlet (20) on
top of the Fan Housing and Outlet Gasket. Slide
Washers (21) onto Bolts (22) and thread into the six
holes in the lip of Outlet, Fan Housing and Outlet
Gasket. Secure in place with Nuts. (See Figure D)
Outlet Gasket (19)
Fan Housing (17)
Outlet (20)
Bolts (22)
Washers (21)
nuts (2)
Hose clamp (23)
Hose (24)
Figure D
7. Connect the Filter Bag Support (33) to the
Collector Support and Collector (30). Thread
in both Bolts (16) through the Collector
Support and through the Filter Bag Support
and into the Collector. (See Figure E)
Filter Bag
Support (33)
collector Support (29)
collector
(30)
Bolt (16)
Figure E
8. Slide the Hose Clamp (23) onto the Hose (24).
Slide Hose with Hose Clamp onto the Outlet.
Once the Hose is in place, tighten the screw
on the Hose Clamp until the Hose is securely
fastened to the Outlet. (See Figure D)
9. Slide the Hose Clamp onto the other end of the
Hose. Slide the top opening of the Hose over the
duct in the Collector. Tighten the screw on the
Hose Clamp until the Hose is securely fastened.
10. Place the Filter Bag (32) on top of the Collector.
Once the Filter Bag is in place, adjust the clamp
so that the clip rests between the teeth. Press the
clamp down to lock in place. Extend the bag so that
the loop on the top hangs on the Filter Bag Support.
11. Place the Collection Bag (37) on the bottom of
the Collector and secure it with Clamp (31).
12. Attach the Handle (34) to the Collector with
Nut (36) and Screw (35). (See Figure F)
Handle (34)
nut (36) and
Screw (35)
Figure F
Assembly (cont′d)
