Central Machinery 59116, Руководство пользователя и инструкции по безопасности

Страница: 3 / 4

Page 3 For technical questions, please call 1-888-866-5797. Item 59116
Mounting Instructions
Place Vise on smooth flat, non plastic surface.
Secure Vise to surface by turning Lock Arm
(3) to engage the Suction Cup (1).
Operation Instructions
1. Turn Rod Handle (7) to open Front Vise (10)
and Rear Vise (14). Place the object you wish
to work on inside Jaws (11). Close and tighten
Jaws by turning Rod Handle (7). Damage
could occur if you over-tighten the Jaws.
2. Tilt or swivel Hobby Vise to desired position by
loosing Collar (4) counterclockwise. When you
have the desired angle for working on your project,
turn Collar (4) clockwise tightly. (See Figure 2)
3. Vise can be adjusted 180° vertically and
360° horizontally. The swivel of the Dome
(19) and Hex Shaft (18) will move the Vise
Front and Vise Back (10, 14) to the desired
angle for better grip and workability.
Maintenance
1. Keep the moving parts lubricated. Wipe off
any lubricant on the Handles and Jaws.
2. Keep Jaws and Suction Cup clean. Remove
Jaws for cleaning by removing Screws.
Parts List and Diagram
Part Description Qty
1 Suction Cup 1
2 Triangle Base 1
3 Lock Arm 1
4 Collar 1
5 Dome Base 1
6 Dome Holder 1
7 Rod Handle 1
Part Description Qty
8 Washer 2
9 Rod Cover 3
10 Front Vise 1
11 Jaw 2
12 Jaw Cover 2
13 Screw 4
14 Rear Vise 1
Part Description Qty
15 Nut 1
16 Bolt 1
17 Fixture 1
18 Hex Shaft 1
19 Dome 1
20 Washer 1
21 Pin 1
21
10
13
4
3
20
11
12
14
15
16
17
18
9
8
7
5
19
2
1
6