Item 67090
For technical questions, please call 1-888-866-5797.
Page 4
procedures not explained in this manual or
any procedures that you are uncertain about
your ability to perform safely or correctly.
29. Do not allow anyone to operate the Log
Splitter who has not read this manual or
has not been instructed on the safe use of
the Splitter. The Log Splitter owner should
instruct all operators in safe Log Splitter
operation.
30. Store equipment out of the reach of children
and other unauthorized persons.
SAVE THESE INSTRUCTIONS.
Specifications
Log Cutting Capacity
(Maximum)
18″ L / 6-1/2″ Dia.
Minimum Log Length
13-1/2″ L
Ram Stroke
8-1/16″
Initial Tool Set Up/Assembly
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including all
text under subheadings therein before
set up or use of this product.
Note:
For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagrams near the end of this manual.
Note:
The Log Splitter is heavy; use care and
proper lifting techniques when move the Log
Splitter.
Assembly
1.
To assemble, insert one Jack Handle (3) into
each of the sockets on the Ram (9). See
Figure B.
Figure B
Jack
Handles (3)
Socket
Ram (9)
