Page 12
For technical questions, please call 1-800-444-3353.
SKU 35098
maintenance anD
SerVicinG
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
tO preVent
SeriOuS injury
FrOm acciDental
OperatiOn:
turn the power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
tO preVent SeriOuS
injury FrOm tOOl
Failure:
Do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, maintenance, and
lubrication
BeFOre eacH uSe,
1.
inspect the
general condition of the tool. Check
for loose hardware, misalignment
or binding of moving parts, cracked
or broken parts, damaged electrical
wiring, and any other condition that
may affect its safe operation.
Check the grinding wheels for build
2.
up of particles which can dull the
surface. Dress the Wheel as needed
according to the Dressing the Wheel
instructions in the General Operating
Instructions.
Empty the Water Reservoir after use
1.
and check the Water Reservoir (22)
for debris build up. Clean as needed.
To remove and clean the Reservoir:
Drain the water from the Water
a.
Reservoir (22) (See General
Operating Instructions - Emptying
the Water Reservoir).
To remove the Water Reservoir,
b.
unthread the three Screws (19) and
Toothed Washers (20) and remove
the Water Reservoir from the unit.
Clean out any accumulated debris
c.
from the bottom using a stiff brush
(sold separately) if needed.
Replace the Reservoir.
d.
aFter uSe,
2.
wipe external surfaces
of the tool with clean cloth.
WarninG! if the supply cord of this
power tool is damaged, it must
be replaced only by a qualified
service technician.
