Page 6
For technical questions, please call 1-800-444-3353.
SKU 34951
When servicing use only identical
10.
replacement parts.
Only use safety equipment that has
11.
been approved by an appropriate
standards agency. Unapproved
safety equipment may not provide
adequate protection. Eye protection
must be ANSI-approved and
breathing protection must be NIOSH-
approved for the specific hazards in
the work area.
Industrial applications must follow
12.
OSHA guidelines.
Maintain labels and nameplates on
13.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare
14.
to begin work before turning on the
tool.
NEVER WEAR GLOVES OR HOLD
15.
THE WORKPIECE WITH A RAG
WHEN SANDING.
DO NOT SAND PIECES THAT
16.
ARE TOO SMALL TO BE SAFELY
SUPPORTED OR HELD. Such
pieces should be sanded by hand.
People with pacemakers should
17.
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure.
WARNING: Some dust created by
18.
power sanding, sawing, grinding,
drilling, and other construction
activities, contains chemicals
known [to the State of California] to
cause cancer, birth defects or other
reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from
chemically treated lumber
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5,
et seq.
)
WARNING: Handling the cord on
19.
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and
birth defects or other reproductive
harm. Wash hands after handling.
(California Health & Safety Code §
25249.5,
et seq.
)
The warnings, precautions,
20.
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
Vibration safety
This tool vibrates during use.
Repeated or long-term exposure to
vibration may cause temporary or
permanent physical injury, particularly
to the hands, arms and shoulders. To
reV 09g
Brought To You By Augusta Flint
