background image

SKU 99887 

For technical questions, please call 1-800-444-3353. 

Page 2

SaVE THIS MaNuaL

Keep this manual for the safety warn-

ings and precautions, assembly, operating, 

inspection, maintenance and cleaning pro-

cedures.  Write the product’s serial number 

in the back of the manual (or month and 

year of purchase if product has no num-

ber).  Keep this manual and the receipt in 

a safe and dry place for future reference.

IMPORTaNT SaFETY 

INFORMaTION

In this manual, on the labeling, 

and all other information provid-

ed with this product:

  This is the safety alert 

symbol.  It is used to alert 

you to potential personal 

injury hazards.  Obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

daNGER indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 

WaRNING 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

CauTION, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.

 

NOTICE is used to 

address practices 

not related to personal injury.
 

CauTION, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

General Safety Warnings

 WaRNING Read all safety 

warnings and instructions. 

Failure to follow the warnings and 

instructions may result in serious 

injury.   

Save all warnings and 

instructions for future reference. 

Work area safety

1. 

Keep work area clean and well lit.  

a. 

Cluttered or dark areas invite acci-

dents.

Keep children and bystanders 

b. 

away while operating the Motorcy-

cle Lift.  

Distractions can cause you 

to lose control.

Personal safety

2. 

Stay alert, watch what you are do-

a. 

ing and use common sense when 

operating the Motorcycle Lift.  do 

not use the Lift while you are tired 

or under the influence of drugs, 

alcohol or medication.

  A moment 

of inattention while operating the Lift-

may result in serious personal injury.

use personal protective equip-

b. 

ment.  always wear aNSI-approved 

safety goggles and heavy duty 

work gloves.

  Safety equipment 

such as non-skid safety shoes will 

reduce personal injuries.

Содержание 99887














Отзывы: