Page 3
For replacement parts, please call 1-800-444-3353.
SKUs
91839, 91840
& 9199
6.
dress properly
. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically nonconductive clothes and nonskid, steel toe footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7.
use eye protection
. Always wear ANSI-approved impact safety glasses underneath a
full face shield. Wear a NIOSH-approved dust mask or respirator when working around
wood dust.
8.
do not overreach
. Keep proper footing and balance at all times. Do not reach over or
across the Log Splitter.
9.
Maintain tools with care
. Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool hoses periodi-
cally, and if damaged, have them repaired by an authorized technician. The handle must
be kept clean, dry, and free from oil and grease at all times.
10.
Remove adjusting keys and wrenches
. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before plugging it in.
11.
Never leave the Log Splitter unattended while in operation.
1.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
13.
Never attempt to split two logs on top of each other.
14.
Check for damaged parts
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if any switch does not turn On and Off properly.
15.
Always operate the Log Splitter on a dry, flat, level surface with the wheels
blocked.
16.
Replacement parts and accessories
. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with this tool. Approved accessories are available from Harbor Freight Tools.
17.
do not operate tool if under the influence of alcohol or drugs
. Read warning labels
if taking prescription medicine to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
18.
Maintenance
. For your safety, service and repairs should be performed regularly by a
qualified technician. Maintenance should be performed regularly.
19.
Never place your hands or body near a hydraulic fluid leak
. Never check for a leak
with your hands or other body parts. High-pressure fluid can be forced under your skin
resulting in serious injury.
0.
Never place hands or feet between the log and splitter wedge, or between the log
and the ram during the forward or reverse stroke
.
1.
This equipment must never be used in any sealed structure.
Carbon
monoxide is produced during operation and is dEAdLy in a closed
environment.
Early signs of carbon Monoxide poisoning resemble the flu,
with headaches, dizziness, or nausea. If you have these signs, the tool may
not be working properly or is improperly vented, get fresh air immediately.
